Product Search

    SEARCH NOW FOR ALL YOUR RADWELL SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Tools / Spindle

    Radwell is not an authorized distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorization by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Radwell is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 1-50 of 983.
    NSK RAX-271E

    NSK

    RAX-271E

    SPINDLE, 90 DEGREE ANGLE, 20,000 MAX RPM, 1 / 1.5 REDUCTION RATIO
    ✓ IN STOCK!
    $2,604.00 Buy Surplus As Low As $1,603.80
    $1,603.80
    ALLEN BRADLEY X-108857

    ALLEN BRADLEY

    X-108857

    DISCONTINUED BY MANUFACTURER, RELAY OVERLOAD SPINDLE, REPLACEMENT PART, MOUNTABLE
    ✓ IN STOCK!
    Buy Surplus As Low As $14.73
    $14.73
    CARR LANE CL-518208-FC

    CARR LANE

    CL-518208-FC

    SPINDLE ASSEMBLY, FLAT CUSHION, FOR TOGGLE CLAMP, STEEL
    ✓ IN STOCK!
    $5.00 Buy Surplus As Low As $2.77
    $2.77
    ZEBRA G48250

    ZEBRA

    G48250

    140XI SERIES, ENHANCED RIBBON TAKE-UP SPINDLE, 140XI'S
    ✓ IN STOCK!
    $584.00 Buy Surplus As Low As $223.32
    $223.32
    BURGMASTER 0024086-01A

    BURGMASTER

    0024086-01A

    SPINDLE MED-LOW SP 3/4INCH
    ✓ IN STOCK!
    $134.10 Buy Surplus As Low As $55.17
    $55.17
    Repair Yours $300.00
    SETCO 48E5574

    SETCO

    48E5574

    SPINDLE 18AMP 2POLE 191V 1250HZ 75RPM 3.8KW 3PH
    ✓ IN STOCK!
    Buy Surplus As Low As $123.41
    $123.41
    CARR LANE CL-316112-FC

    CARR LANE

    CL-316112-FC

    FLAT CUSHION SPINDLE, FOR USE WITH TOGGLE CLAMPS, 1-3/8 LENGTH IN SIZE
    ✓ IN STOCK!
    $4.26 Buy Surplus As Low As $3.85
    $3.85
    BURGMASTER 0004042-00A

    BURGMASTER

    0004042-00A

    SPINDLE 14T
    ✓ IN STOCK!
    Buy Surplus As Low As $48.65
    $48.65
    ZEBRA P1006058

    ZEBRA

    P1006058

    ZEBRA AIT, 110XI4, SPARE PART, KIT RIBBONSUPPLYSPINDLE 110XI4
    ✓ IN STOCK!
    $509.00 Buy Surplus As Low As $105.86
    $105.86
    BINKS 54-3512

    BINKS

    54-3512

    SPINDLE ASSEMBLY
    ✓ IN STOCK!
    $23.83 Buy Surplus As Low As $19.86
    $19.86
    IDEAL 31-331

    IDEAL

    31-331

    BLOWER VACUUM LINE PACKAGE,YELLOW, FOAM TIP,3/4IN CODUIT, 200FT LINE LENGTH, 1.7LB TENSILE STRENGTH
    ✓ IN STOCK!
    $5.94 Buy Surplus As Low As $2.86
    $2.86
    HOMAG 4-014-21-0678

    HOMAG

    4-014-21-0678

    DISCONTINUED BY MANUFACTURER, BORING SPINDLE, 8MM SHAFT
    ✓ IN STOCK!
    Buy Surplus As Low As $197.47
    $197.47
    INGERSOLL RAND 42959

    INGERSOLL RAND

    ARO

    42959

    DISCONTINUED BY MANUFACTURER, 383 AIR & ELECTRIC HOIST PART, SPINDLE
    ✓ IN STOCK!
    Buy Surplus As Low As $213.17
    $213.17
    INGERSOLL RAND 49643

    INGERSOLL RAND

    49643

    394 AIR ASSEMBLY TOOL PART, SPINDLE
    ✓ IN STOCK!
    $264.00 Buy Surplus As Low As $143.42
    $143.42
    SANYO MACHINE WORKS SDN-FT1-025A

    SANYO MACHINE WORKS

    SDN-FT1-025A

    SPINDLE,1/23.4 25.0 NM, -32 MV/NM
    ✓ IN STOCK!
    $455.00 Buy Surplus As Low As $211.72
    $211.72
    COLOMBO GC90E810-4

    COLOMBO

    GC90E810-4

    ELECTRIC SPINDLE, COLLET TYPE, SHAFT DRIVEN FAN, 220 VAC, 3 KW, 4 HP, 200 HZ, 11.5 AMP
    ✓ IN STOCK!
    $3,114.29 Buy Surplus As Low As $1,219.80
    $1,219.80
    Repair Yours $1,065.72
    COLOMBO RV55-22

    COLOMBO

    RV55-22

    DISCONTINUED BY MANUFACTURER, ELECTRIC SPINDLE, COLLET TYPE, SHAFT DRIVEN FAN, 380 VAC, 1.8 AMP, 0.73 KW, 1 HP, 400 HZ
    ✓ IN STOCK!
    Buy Surplus As Low As $521.99
    $521.99
    Repair Yours $433.25
    NAKANISHI KINZOKU NR-303

    NAKANISHI KINZOKU

    NR-303

    SPINDLE, ALLOWABLE MOTOR SPEED 30,000 RPM, MA SERIES, CAN BE USED IN CONJUNCTION WITH WATER OR OIL BASED COOLANTS
    ✓ IN STOCK!
    $851.72 Buy Surplus As Low As $491.87
    $491.87
    SANYO SGNSP2050F

    SANYO

    SGNSP2050F

    DISCONTINUED BY MANUFACTURER, SPINDLE, 50.0 NM, 750 RPM
    ✓ IN STOCK!
    Buy Surplus As Low As $56.10
    $56.10
    Repair Yours $300.00
    NAKANISHI KINZOKU NR-2351

    NAKANISHI KINZOKU

    NR-2351

    DISCONTINUED BY MANUFACTURER, SPINDLE, HIGH-SPEED, 1UM, 50000RPM, THREADED, MALE
    ✓ IN STOCK!
    Buy Surplus As Low As $729.00
    $729.00
    PARKER L10-007

    PARKER

    SKINNER

    L10-007

    SPINDLE ASSEMBLY
    ✓ IN STOCK!
    $1.72 Buy Surplus As Low As $0.69
    $0.69
    NAKANISHI KINZOKU NR-311

    NAKANISHI KINZOKU

    NR-311

    DISCONTINUED BY MANUFACTURER, SPINDLE, HIGH-SPEED, 2UM ACCURACY, 30000RPM
    ✓ IN STOCK!
    Buy Surplus As Low As $191.01
    $191.01
    DOVER CORPORATION 235208

    DOVER CORPORATION

    DESTACO

    235208

    3/8-16 CARBON STEEL CAP TIP CLAMP SPINDLE ASSEMBLY 121.16MM THREAD LENGTH, 146.05MM OAL, FLAT TIP CAP, 1.02" TIP SURFACE DIAM, USE WITH TOGGLE CLAMPS (MOQ=1, PKG QTY=1)
    ✓ IN STOCK!
    $11.00 Buy Surplus As Low As $5.45
    $5.45
    KENNAMETAL 4.81501R631/241-EACH

    KENNAMETAL

    4.81501R631/241-EACH

    CARBONE INSERT .625DECIMALS BLACK ( PACK OF 10 )
    ✓ IN STOCK!
    Buy Surplus As Low As $0.64
    $0.64
    DOVER CORPORATION 215208

    DOVER CORPORATION

    DESTACO

    215208

    1/4-20 CARBON STEEL CAP TIP CLAMP SPINDLE ASSEMBLY
    ✓ IN STOCK!
    $5.58 Buy Surplus As Low As $3.44
    $3.44
    TOOLMEX CORPORATION 3-901-001

    TOOLMEX CORPORATION

    3-901-001

    DISCONTINUED BY MANUFACTURER, PRECISION LIVE CENTER, MT1, 0.005MM / 0.00002 INCH T.I.R, ALLOY STEEL SPINDLE, HEAT TREATED TO RC 60-62, PRECISE, TOUGH
    ✓ IN STOCK!
    Buy Surplus As Low As $75.35
    $75.35
    ATLAS COPCO 4230190380

    ATLAS COPCO

    4230190380

    DISCONTINUED BY MANUFACTURER, NUT RUNNER, 570 VOLTS, 217 HZ
    ✓ IN STOCK!
    Buy Surplus As Low As $40.39
    $40.39
    DOVER CORPORATION 507208-SS

    DOVER CORPORATION

    DESTACO

    507208-SS

    5/16-18 STAINLESS STEEL CAP TIP CLAMP SPINDLE ASSEMBLY 58.17MM THREAD LENGTH, 76.2MM OAL, FLAT TIP CAP, 0.55" TIP SURFACE DIAM, USE WITH TOGGLE CLAMPS
    ✓ IN STOCK!
    $9.79 Buy Surplus As Low As $5.69
    $5.69
    DOVER CORPORATION 507206

    DOVER CORPORATION

    DESTACO

    507206

    5/16-18 CARBON STEEL SWIVEL FOOT TIP CLAMP SPINDLE ASSEMBLY 49.28MM THREAD LENGTH, 69.85MM OAL, FLAT TIP CAP, 0.56" TIP SURFACE DIAM, USE WITH TOGGLE CLAMPS (MOQ=1, PKG QTY=1)
    ✓ IN STOCK!
    $13.00 Buy Surplus As Low As $7.34
    $7.34
    DOVER CORPORATION 205943

    DOVER CORPORATION

    DESTACO

    205943

    8-32 STAINLESS STEEL HEX HEAD TIP CLAMP SPINDLE ASSEMBLY 19.05MM THREAD LENGTH, 21.84MM OAL, 1/4" TIP SURFACE DIAM, USE WITH TOGGLE CLAMPS (MOQ=1, PKG QTY=1)
    ✓ IN STOCK!
    $5.80 Buy Surplus As Low As $3.39
    $3.39
    DOVER CORPORATION 2007208-M

    DOVER CORPORATION

    DESTACO

    2007208-M

    M8 CARBON STEEL CAP TIP CLAMP SPINDLE ASSEMBLY 44.96MM THREAD LENGTH, 62.99MM OAL, FLAT TIP CAP, 0.83" TIP SURFACE DIAM, USE WITH TOGGLE CLAMPS, (MOQ=1, PKG QTY=1)
    ✓ IN STOCK!
    $6.04 Buy Surplus As Low As $3.44
    $3.44
    SANYO MACHINE WORKS SCH-SP-025F1N

    SANYO MACHINE WORKS

    SCH-SP-025F1N

    DISCONTINUED BY MANUFACTURER, SPINDLE NUTRUNNER, 24.5 NM
    ✓ IN STOCK!
    Buy Surplus As Low As $35.32
    $35.32
    IBAG HF62.6A100CPS

    IBAG

    HF62.6A100CPS

    CONTINUOUS DUTY SPINDLE POWER, 1000W, 80,00RPM, FOUR PRECISION CERAMIC BALL BEARINGS, COLLET-TYPE TOOL RETENTION
    ✓ IN STOCK!
    $13,992.86 Buy Surplus As Low As $4,896.38
    $4,896.38
    SANYO MACHINE WORKS SDN-SP3-320A

    SANYO MACHINE WORKS

    SDN-SP3-320A

    DISCONTINUED BY MANUFACTURER, SPINDLE, FOR USE W/ NUT RUNNER, W/O MULTI CONTROLLER, 54-180 NM TORQUE RANGE, 465 RPM SPEED, 320 NM, -2.5 MV/NM
    ✓ IN STOCK!
    Buy Surplus As Low As $523.56
    $523.56
    DORNER 247304

    DORNER

    247304

    SPINDLE, FOR CONVEYOR,4.5IN LONG
    ✓ IN STOCK!
    $241.08 Buy Surplus As Low As $73.06
    $73.06
    DORNER 200028M

    DORNER

    200028M

    PLATE, TAIL, SPINDLE, LOW SIDE, LEFT HAND
    ✓ IN STOCK!
    $42.84 Buy Surplus As Low As $21.87
    $21.87
    BOSCH 0608810026

    BOSCH

    0608810026

    TIGHTENING SPINDLE, ADAPTER, 4A SZ4 GE OUTPUT
    ✓ IN STOCK!
    $3,869.00 Buy Surplus As Low As $2,941.00
    $2,941.00
    DOVER CORPORATION 507208

    DOVER CORPORATION

    DESTACO

    507208

    BONDED NEOPRENE SPINDLE, FLAT-TIP, 5/16-18" THREAD SIZE, 0.75 TO 0.83" CAP WIDTH, 60-80 SHORE A HARDNESS
    ✓ IN STOCK!
    $5.48 Buy Surplus As Low As $3.53
    $3.53
    BOSCH 0 608 800 610

    BOSCH

    REXROTH

    0 608 800 610

    DISCONTINUED BY MANUFACTURER, TIGHTENING SPINDLE, OFFSET OUTPUT DRIVE, 3S1, SZ3 3/8 INCH, 1.7 NM, 740 RPM, 55 NM MAX TORQUE
    ✓ IN STOCK!
    Buy Surplus As Low As $1,320.00
    $1,320.00
    SANYO MACHINE WORKS SCH-SP-630S1E

    SANYO MACHINE WORKS

    SCH-SP-630S1E

    ELECTRIC SPINDLE, 5/8 IN, 180 NM
    ✓ IN STOCK!
    $330.00 Buy Surplus As Low As $121.80
    $121.80
    SANYO MACHINE WORKS SDN-SP3-180SB

    SANYO MACHINE WORKS

    SDN-SP3-180SB

    DISCONTINUED BY MANUFACTURER, SPINDLE, FOR USE W/ NUT RUNNER, FOR SGN-DR3-180 DRIVE, W/O MULTI CONTROLLER, 54-180 NM TORQUE RANGE, 465 RPM SPEED
    ✓ IN STOCK!
    Buy Surplus As Low As $395.59
    $395.59
    Repair Yours $328.34
    SIOUX TOOLS 22641B

    SIOUX TOOLS

    22641B

    ROTOR SPINDLE
    ✓ IN STOCK!
    $353.54 Buy Surplus As Low As $254.54
    $254.54
    MITSUBISHI MDS-B-SPH-75

    MITSUBISHI

    MDS-B-SPH-75

    DISCONTINUED BY MANUFACTURER, SPINDLE DRIVE UNIT, MDS-B SERIES, 270-311 VDC, 200-230 VAC, 50/60 HZ
    ✓ IN STOCK!
    Buy Surplus As Low As $1,551.00
    $1,551.00
    Repair Yours $1,171.00
    NAKANISHI KINZOKU NE236

    NAKANISHI KINZOKU

    NE236

    DISCONTINUED BY MANUFACTURER, SPINDLE SYSTEM, E2530 ,2.8 AMP, 12 VAC, 0-500 HZ
    ✓ IN STOCK!
    Buy Surplus As Low As $1,702.14
    $1,702.14
    Repair Yours $1,500.00
    DOVER CORPORATION 207206

    DOVER CORPORATION

    DESTACO

    207206

    1/4-20 CARBON STEEL SWIVEL FOOT TIP CLAMP SPINDLE ASSEMBLY
    ✓ IN STOCK!
    $8.64 Buy Surplus As Low As $7.20
    $7.20
    GENERIC 857031

    GENERIC

    857031

    ROLLER SINDLE RLR PINCH 1/4IN BORE DIA
    ✓ IN STOCK!
    Buy Surplus As Low As $8.23
    $8.23
    BINKS 54-6220

    BINKS

    54-6220

    AIR VALVE SPINDLE, TOUCH-UP
    ✓ IN STOCK!
    $64.00 Buy Surplus As Low As $49.00
    $49.00
    FIVES 20A-122

    FIVES

    WARNER & SWASEY

    20A-122

    WRENCH 5SPINDLE SCREW MACHINE
    ✓ IN STOCK!
    Buy Surplus As Low As $5.18
    $5.18
    DOVER CORPORATION 527208

    DOVER CORPORATION

    DESTACO

    527208

    3/8-16 CARBON STEEL CAP TIP CLAMP SPINDLE ASSEMBLY 63.5MM THREAD LENGTH, 88.9MM OAL, FLAT TIP CAP, 0.88" TIP SURFACE DIAM, USE WITH TOGGLE CLAMPS (MOQ=1, PKG QTY=1)
    ✓ IN STOCK!
    $8.45 Buy Surplus As Low As $5.79
    $5.79
    DOVER CORPORATION 509208

    DOVER CORPORATION

    DESTACO

    509208

    5/16-18 CARBON STEEL CAP TIP CLAMP SPINDLE ASSEMBLY 57.91MM THREAD LENGTH, 76.2MM OAL, CONE CUSHION CAP, 0.63" TIP SURFACE DIAM, USE WITH TOGGLE CLAMPS (MOQ=1, PKG QTY=1)
    ✓ IN STOCK!
    $6.45 Buy Surplus As Low As $3.93
    $3.93
    Next
    1 2 3 4 5 6 7 8 9 10 11
    Related Categories
    Bearing Breather Filter Bushing Chuck Collet Diagnostic Equipment Grease Lubricant Pipe and Coupling Pulley/Sheave Seal Shaft/Shafting